Paralimnitiko mixed-sprits

Description

Cement-based top coat plaster for exterior use.

 

Advantages

Good Abrasion Resistance.

 

Range of Application

Ideal for coating on plastered surfaces of 2nd hand. 

Product Identity

  • Color: white & beige
  • Package & Weight: Bags of 25kg
  • Storage: 8 months in the original packaging and in a dry place
  • Particle size: 0 - 2.3 mm       

Application Data

  • Mixing Ratio: 25 kg /8 L water
  • Pot life: approx. 1hour at 23 ºC  and 50% RH
  • Thickness: 4-6 mm/coat
  • Consumption: 4-5kg/m² depending on use and surface
  • Application temperature: +5ºC - +35ºC     

Final Performance

  • Adhesion strength: > 1 N/mm² 
  • Water absorption:< 0.1
  • The plaster shall be spread with stainless steel spatula or a special spaying machine to a 4-6 mm thickness. 

Substrates Preparation

  • The substrate shall be free from dust, oil or loose materials. It must be thoroughly wetted.  

 

Preparing the mix

  • Pour the material into clean water and mix with a low speed electric mixer, or in a concrete mixer, until a homogeneous lump free mix is obtained.   Allow the mix to cure for 5 minutes and periodically repeat stirring. Attention! Additional water will make your mixture sloppy and may cause negative results on final strength.
  • Use the mixture when is still fresh. Do not leave the mix unmixed for a long time.
  • Do not mix with water or latex additive when the mixture starts to set in the bucket. In such case the mix should be dropped. 

To Find a Shop for this product, click here.