Ready to use high quality primer based on synthetic resins.



  • Ready for use
  • Reduce suction from porous substrates-prevents rapid drying of applied material
  • Improves adhesion to the substrate
  • Colourless after application



  • On cement or gypsum boards to which cement-based products or adhesives must be applied.
  • On very absorbent, porous and difficult substrates prior to applying self-levelling compounds, plasters or adhesives
  • Preparing cement-based surfaces prior to smoothing with self-levelling compounds.
  • Between layers of smoothing compounds once first coat is perfectly dry.

Product Identity

  • Appearance: Liquid
  • Colour: White
  • Packaging & Weight: Plastic containers of 1Lt, 4Lt, 10Lt and 20Lt
  • Storage: 12 months in unopened packing  

Application Data

  • Application temperature: +5ºC-+35ºC
  • Consumption: 1 kg/ 6-8 m2 depending on porosity of the substrate.
  • Apply ALFALIQ PRIMER directly to the surface, using a roller or brush.
  • Once ALFALIQ PRIMER is applied, it is recommended that the substrate should be subsequently coated within 2-3 hours (drying time varies with the absorbency of the substrate and environmental conditions-temperature and humidity). Otherwise you risk the chance of re-contaminating the surface with site dirt and dust.

Substrates Preparation

  • The substrate must be clean and free of dust, loose materials, oil, grease or old plaster, paint etc.

To Find a Shop for this product, click here.