ALFALIQ UV THERMAL-Acrylic

Colors: White, Cream, Light Yellow, Caramel, Light Grey, Beige, Brown, Dark Grey

Description: A ready to use thick pasty, extra white acrylic, scratch effect plaster. It consists of agreegate with a special particle size granulation, to form a coarse - textured decorative surface. 

Benefits:

  • Excellent adhesion & alkaline resistance
  • Excellent workability - fast application
  • Highly resistance to UV rays and ageing
  • Cracking prevention 
  • High water repellency and excellent vapor permeability
  • Suitable for indoor & outdoor application

Application: It' s used to protect and decorate exterior & interior surfaces (plaster, concrete, facade thermal insulation systems).  

Product Identity

  • Apperance: Paste
  • Packaging: Plastic buckets of 5kg, 10kg and 25kg
  • Granulometry:< 1 mm (flat finish of free forming) or < 1.5 mm (uniform scratched textured surface)  
  • Density: 1.9-2 kg/L (according to the grain size)
  • Dry Solids content: 80-85 %
  • Shelf Life-Storage: 12 months from production date
  • Toxicity: No

 

Application Data

  • Preparation: Ready to use
  • Application Temperature Range: +5 ºC - +35 ºC
  • Consuption: 2.5 - 3 kg/m2
  • Drying: In open air
  • Time to be ready for painting: About 1-2 days

 

PerformanceCharacteristicsaccording ΕΝ15824 – Textured Coatings for Internal and External Use based on Organic Binders

  • Adhesion  - ΕΝ 1542: 0.95 N/mm² 
  • Water absorption – ΕΝ 1062-3: Class W3 (w <0.1 kg/m2.min0.5)
  • Water Vapour Permeability– ΕΝ ISO 7783-2: Class V2, medium (0.14m < Sd < 1.4 m)
  • Thermal Conductivity – EN 1745: ≈ 0.7 W/m.K – standard table value
  • Reaction to Fire – ΕΝ-13501: - Α2-S1,d01
  •                                                 - B-S1,d02

1ETICS with stone wool

2ETICS with XPS

 

  • ALFALIQ UV THERMAL is applied after the primer has dried completely (max 24 hours after primer application). 
  • Plaster is applied by hand using a stainless or plastic trowel. While is still fresh, the plaster is treated (pressed) by plastic float, in horizontal, vertical or circular movements depending on the desirable appearance of the surface
  • Protect the plastered surface from high temperatures, rain and frost until is cured (about 24 hours). 

Substrate Preparation 

Substrate must be dry, free of dust or loose particles etc.Prime the surface with ALFALIQ GRAFIT PRIMER (in the same colour with graffiato) prior application.  

 

Preparing the mix

Stir well before application. Stirring should be done with slow circular motions in order to avoid creating bubbles in the mass of the material.