ALFALIQ GRAFIT PRIMER

Description

ALFALIQ GRAFIT PRIMER is a thick liquid available in a wide range of colours (depending on the final layer colour).

 

Range of Applications

It is used to prepare the cementitious surface before applying the final acrylic coat (ALFALIQ GRAFIT/ALFALIQ UV THERMAL Acrylic or Silicone). It is used to even out the absorption of the substrate and improve bonding. It may be used to even out the surface, by creating an even finish and by covering small imperfections. 

 

Product Identity

  • Appearance: Liquid
  • Color: white or colored
  • Packaging: Plastic buckets of 5lt, 10lt & 20lt
  • Storage: 12 months in its unopened original packaging
  • Dry Solids Content: 65% w/w

 

Application Data

- Application temperature: +5 ºC - +35 ºC. Do not apply under direct sunlight or in windy weather.

- Consumption: 3 - 4 m2/ kg 

 

Apply a single coat by using a brush or roller.   

Substrate Preparation

All substrates, whether they are new or old, must be solid, clean, dry and free of all traces of oil, grease, mould and any other material which could compromise the bond. Seal any cracks which are present and repair any deteriorated areas. 

 

Preparing the mix

ALFALIQ GRAFIT PRIMER may be used neat or diluted by 5-10% water. Mix well before use (using a low speed drill where is possible).