Gloss Paint Globus

Colors: A wide variety of shades through Globus Colors tinting system 'COLORMIX'. 

Description: Hybrid, acrylic - alkyd water based gloss paint, with very good working and levelling properties, excellent whiteness, great coverage, strong adhesion on even painted surfaces, with outstanding resistance to frequent washing conditions. Gloss Paint of Globus is environmentally friendly and low on odor (free of ammonia and other hazardous substances, such as aromatic hydrocarbons, free formaldehyde, heavy metals or thinner). 

  • Easy to apply.
  • Strong adhesion.
  • Long Lasting Protection.
  • Highly Resistance to yellowing and staining

Range of Application: Ideal for interior and exterior use on surfaces of wood, metal, plaster, etc. 

VOC (Volatile Organic Compounds)

Colors of Interior / Exterior Decorations and cladding paints of wood and metal (Category A/d, Type Y). Content Limit Value I (2007): 150 g/l. Content Limit Value II (2010): 130 g/l. Maximum VOC Content < 40 g/l (ready for use product)

Package: Containers of 1Lt, 2.5Lt, 4Lt & 9Lt. 

Colors: It is available through Globus Colors tinting system 'COLORMIX' in a wide variety of shades.

Storage: Containers must be kept closed, in a roof place, protected from frost and direct sunlight. 

Cleaning of paint tools: Tools must be cleaned immediately after use with water or/and detergent agent.

Stirring: gentle stirring before use and during the application. 

Dilution: 0-15% clean water, depending on the type of tool will be used in the application. 

Application Tools: Roller or brush (with maximum water dilution 10%) or spraying gan (with maximum water dilution 15%). 

Number of layers: 2 layers (ideally)

Consumption: 12 - 14 m2 / L per coat on properly prepared surfaces. Consumption may vary depending on the substrate, the surface porosity and the application conditions. 

Drying time: - To the touch about 2-3 hours.

                      - For recoating about 8-10 hours. 

(Drying times depend on weather conditions. The above information refers to +25 oC and 50% RH.)

Installation Conditions: - Temperature between +10 oC and +35 oC.

                                         - Maximum Humidity 65%

Protection from rain: Protect the lacquered surface for at least 24 hours.

Surface Preparation

  • All surfaces should be completely dry and free from various stains, grease, dust, dirt and loose paints.
  • New surfaces such as plastered, concrete and gypsum boards, must be primed with 'Alfaliq Primer'.  
  • All wood surfaces, new or old, should be rubbed with an appropriate sandpaper and then, the dust created by rubbing should be removed.
  • Metal surfaces must be primed with an anti-rust primer.